SummaCut Series
Features:
Legendary Tracking
The large, easy-to-use control panel allows the operator to quickly change the speed, pressure, plot mode and other settings, perform test cuts, and much more.
Optical Positioning System
OPOS-X contour cutting alignment enables you to die-cut valuable printed vinyl graphics with complete confidence and ease.
High-speed Cutting Head
The newly designed high-speed cutting head features incredible accuracy for reliable and effortless vinyl cutting.
Intelligent Media System
Integrated media rollers and roll end flanges load vinyl straight and keep media on track, even when cutting at top speed.
| MODELS |  |
 |
 |
 |
| CUTTING TYPE | Drag knife with TurboCut and Tangential Emulation Modes | |||
| TOOL COMPATIBILITY | Blade, Pen, Pounce Tool | |||
| CUTTING WIDTH | 60 cm (23.6 inch) | 120 cm (47.2 inch) | 135 cm (53.1 inch) | 158 cm (62.2 inch) |
| CUTTING SPEED | All SummaCut models cut at speeds up to 1131 mm/sec (44 ips) diagonal | |||
| AXIAL SPEED | Up to 2 G | |||
| MAXIMUM ACCELERATION | Up to 3 G diagonal | |||
| TRACKING PERFORMANCE | Within ± 0.1mm (± 0.004 in.) on plots up to 8 m long (40 ft.); on rolls up to 760 mm wide Within ± 0.1mm (± 0.004 in.) on plots up to 4m long; on rolls over 760 mm wide |
|||
| CUTTING FORCE | 0-400 grams of down-force, in 5 gram increments | |||
| REPLOT MEMORY | 4 MB (buffer size: 16 MB) | |||
| DISPLAY LANGUAGES | English; French; German; Dutch; Italian; Spanish; Polish; Lithuanian | |||
| CONNECTIVITY | USB | |||
| POWER REQUIREMENTS | 100-120 / 220-240 VAC, 50/60 Hz, 85 VA maximum | |||
| DIMENSIONS | 100  x 35 (D) x 30 (H) cm (39.4 x 13.8 (D) x 11.8 (H) in.) |
160 x 68 (D) x 112 (H) cm (63 x 26.8 (D) x 44.1 (H) in.) |
175 x 68 (D) x 114.5 (H) cm (68.9 x 26.8 (D) x 45.1 (H) in.) |
198 x 68 (D) x 114.5 (H) cm (77.9 x 26.8 (D) x 45.1 (H) in.) |
| WEIGHT | 15 kg (33 lbs) | 42 kg (92 lbs) | 48 kg (106 lbs) | 54 kg (119 lbs) |
| OPERATING TEMPERATURE | 15˚ to 35˚C (59˚ to 95˚F) | |||
| STANDARD ACCESSORIES | WinPlot or MacSign Cut Software, CutterControl Parameter Software, CD w/ Manuals and Drivers, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), 1 Spare Fuse, Standard 36˚ Blade Holder, 2 Standard 36˚ Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades. | |||
| OPTIONAL ACCESSORIES | Stand or Stand and Basket for SummaCut D60
|
|||
Contact us for pricing
